The Apple iPhone 12 Pro Max boasts an impressive array of features, with one of the most standout being its water resistance capability.
With this article, we aim to give you a thorough understanding of the iPhone 12 Pro Max water test and what it means for users. We will explain the details of the iPhone’s water resistance features, and the tests it undergoes. We will also cover the precautions you need to take to make it last longer.
Water Resistance Features of iPhone 12 Pro Max
Apple’s iPhone 12 Pro Max is rated IP68 under IEC standard 60529. The IP rating or ‘Ingress Protection’ rating defines a device’s resistance level to dust and water.
Understanding what each digit means is important so the ‘6’ means that the device is completely protected from dust, while the ‘8’ indicates the level of protection from submersion in water. You will understand these IPX ratings better by reading Steve Guttenberg’s article here.
In simpler terms, the iPhone 12 Pro Max can withstand water depths of up to 6 meters for approximately 30 minutes.
Unveiling The iPhone 12 Pro Max Water Test
Apple performs rigorous testing to ensure that its devices meet the claimed water resistance standards. The iPhone 12 Pro Max water test involves submerging the device in water at varying depths and durations.
This test verifies the device’s ability to withstand different water pressure levels without allowing water ingress, ensuring that it can survive accidental spills, splashes, and even short immersions.
Understanding The Limitations
While the iPhone 12 Pro Max is water-resistant, it is very important to know that it is not completely waterproof. Prolonged submersion, especially in saltwater or chlorinated water, can degrade the device’s water resistance over time.
Additionally, water resistance isn’t a permanent condition. The water resistance capabilities of a device will be reduced over time as a result of normal wear and tear.
Additionally, Apple’s warranty does not cover liquid damage. Therefore, even though the iPhone 12 Pro Max can handle water exposure, it’s recommended to avoid unnecessary water contact when possible.
Maintaining iPhone 12 Pro Max’s Water Resistance
To maintain your iPhone 12 Pro Max’s water resistance, ensure that its seals aren’t compromised. Regularly check the device for cracks, especially around the speakers, microphones, and buttons. Also, avoid exposing your iPhone to soap, detergents, acids, or high-pressure liquids.
After exposure to liquid, rinse the iPhone with tap water and wipe it with a soft, lint-free cloth. Ensure the device is completely dry before charging. You should also wait at least five hours before using wired headphones or accessories in the Lightning connector.
What To Do If iPhone 12 Pro Max Gets Wet?
If your iPhone 12 Pro Max gets wet, follow these steps to minimize damage and ensure its longevity:
- Remove the iPhone from the water: As soon as possible, take the device out of the water to reduce its exposure.
- Turn off the iPhone: To prevent short-circuits or other electrical damage, switch off the device.
- Wipe it down: Use a soft, lint-free cloth (like a microfiber cloth) to gently wipe down the exterior of your iPhone. Avoid shaking the device, as this could potentially spread water to internal components.
- Remove your SIM card: Use the SIM card removal tool (or a paperclip) to take out the SIM card and tray. This will allow any water trapped inside to escape.
- Allow it to air dry: Place your iPhone in a dry, well-ventilated area and let it air dry completely. This could take several hours. Avoid using a heat source to speed up the drying process. You may damage the iPhone.
- Wait before charging: Make sure your iPhone is completely dry before you plug it in to charge. Charging a wet iPhone could cause further damage.
- Check for water damage: If your iPhone starts behaving unusually after it has dried, there might be internal damage. The iPhone 12 Pro Max has a liquid contact indicator(LCI) in the SIM slot which turns red when it comes into contact with water or a liquid containing water. If the LCI is red, it indicates that your device may have been damaged by water.
Remember, even though the iPhone 12 Pro Max has an IP68 water resistance rating, it’s not designed to be completely waterproof. Repeated exposure to water can degrade the seals and adhesives that provide this water resistance. Always take precautions to keep your device dry whenever possible.
Conclusion
The water resistance feature of the iPhone 12 Pro Max offers an added layer of protection, making it a reliable choice for those who live a more active or outdoor lifestyle. However, understanding the results and limitations of the iPhone 12 Pro Max water test is vital to ensure the longevity of your device.
While the iPhone 12 Pro Max does well in water tests, it’s crucial to remember that water resistance isn’t the same as being waterproof. Care should be taken to prevent liquid damage, and standard maintenance practices should be followed. Remember, while your iPhone 12 Pro Max is designed to survive the occasional water mishap, it’s always better to be safe than sorry.